Takter 650 Fabric Spray Glue is a high-quality temporary adhesive designed to keep the fabric firmly on the surface during embroidery/cutting or sewing, thus being applicable to all types of textiles and fabric tapes. It leaves no glue residue and, as such, is a colorless fabric glue that does not stain or transfer to the same. It doesn’t leave glue residue on the needles or dirty the machines.
Temporary adhesive spray for embroidery
Helps stabilize tissue
Widely used for knitted fabrics
It is a professional product, suitable for textile manufacturing companies, for the correct fixation of fabrics while they are at work and thus, the Takter 650 spray glue is a glue suitable for the following product ranges: Cotton Fabrics, Knits, Polyester fabrics, fabrics with mixed materials, and in general, for all types of fabrics. It can also be applied on textile lines.
Mode of Use
Shake the fabric spray glue well before use and then spray it onto the work area at a distance of approximately 25 to 30 cm from the material to be sprayed and then place the fabric on the work area.
Composition
Resins and others, Dimethyl Ether, Butane/Propane Propellant, Methylal, Isobutane, Hydrocarbons, C6, Isoalkans, Acetone, 2-Methibutane.
Security Notice
H222 aerosol spray glue for flammable fabric. H229 pressure vessel. P102 Keep out of the reach of children. P210 Keep away from heat, sparks, hot surfaces, open flames or other sources of ignition. P211 Do not spray over an open flame or other source of ignition. P251 Do not pierce or burn, even after use. P261 Avoid breathing aerosol. P271 Use in a well-ventilated place. P410 + P412 dispose of the fabric spray glue container in accordance with national regulations. The manufacturer declines all liability for misuse and incorrect storage of the product. Product made in Italy
This fabric spray glue has obtained the OEKO-TEX – ECO PASSPORT certificate.
Manufacturer: Siliconi Commerciale SpA
